Aquatronica pH Starter kit
The Aquatronica pH Starter Kit
Is the best value way to automate your aquarium systems. The Aquatronica has a proven 5 years record of providing reliable plug and play aquarium control.
If you can push a plug into a socket then you can set-up your an aquatronica and automate your aquarium. Once connected it is easy to set control levels and turn on and off lights, fans chillers, pH, Ozone, you can even automate feeding and water changes.
The Starter pack includes a plugbar that has 6 switchable sockets, the main controller, pH interface and probe holder, everything to get you up and running.
This kit is has the latest updated black controller which works to provice a visual display of the aquariums parameters.
Price: £389.00 |  |
|
|
Aquatronica Multi Tester Hand Held
The AQUARIUM MULTITESTER is an electronic device able to read all the most important aquarium values (temperature, pH, Redox, marine density, conductivity, level): it allows to control every available value (two values can be controlled at the same time) and all the data is displayed on the same screen (thanks to the two USB connections).
The MULTITESTER can be reprogrammed by the use of our PC interface (ACQ220) and also features an Electronic Diary function for the management of regular and special maintenance.
Price: £119.99 |  |
|
|
Aquatronica Active Hub
Active hub allows other aquatronica accessories to be connected to the aquarium controller system, when every connector on the multioutlets is already being used for other connections.The active hub consists in 6 data connectors (USB-type) and a power jack to connect the
adapter.
Price: £69.99 |  |
|
|
Aquatronica Ethernet Module
Ethernet Module
Thanks to the Ethernet module and a remote connection, it is possible to dialogue via internet or LAN networks. This allows the user to check the Aquarium Controller in twodistinct ways: - by connecting from any internet point, via a browser; - by connecting to a LAN network. In both cases, it is possible to monitor the aquarium data and also manually enable and disable every single socket of the power units connected to the system. It is also possible to enable email alarm management (you receive a message at the desired email
address if a malfunction occurs).
Price: £119.99 |  |
|
|
Aquatronica SMS Alert System
Thanks to the GSM module and a remote connection, it is possible to dialogue via a mobile phone. There must be a SIM card from any mobile phone company (not supplied) inside the GSM module. This makes it possible to receive considerable information about the condition ofyour aquarium, such as:triggered system alarms black-out warnings and a subsequent signal when the power is turned back on (thanks to the internal battery) you can ask the control unit for the list of water chemical values send and receive sms messages just like any normal mobile phone
The firmware inside the GSM module can be continually updated on-line.
TECHNICAL DATA
Power supply voltage: 115V 60Hz - 220V 50Hz
SIM connector: inside the module
Antenna: supplied
Battery: PP3 format - 9V - non rechargeable
Price: £279.99 |  |
|
|
Aquatronica Tripple Doser
Aquatronica dosing pumps guarantee the possibility of metering liquids in your aquarium. The module consists in 3 peristaltic pumps which function independently and allow the
following types of dosage:
Single dosage: allows a pre-established quantity ofthe substance to be administered at a set time and on set days;
repeated dosage: allows a dosage to be repeated at regular intervals (hours - days); weekly dosage: allows the desired dosage to be administered only on set days of the week;
diffused dosage: the desired substance is administered evenly over a set time lapse.
Aquatronica dosing pumps also administer substances on the basis of data provided by the electrodes connected to the system; this innovative function allows you to automatically
correct the water biological balance.
There are also 3 optional connectors which in future will allow stirring systems to be
connected to the module; this will allow the metering of semi liquid substances (which would
tend to deposit).
TECHNICAL DATA
Power supply voltage: 115V 60Hz - 220V 50Hz
Number of pumps: 3
Min. resolution: 1 ml
Accuracy: ± 5%
Available NOW!
Price: £199.00 |  |
|
|
AQUATRONICA BASE UNIT
All items in the Aquatroica range are available as seperate items, for a more detailed description of the controller see the kit description the unit is supplied with temperature probe but draws its power from the plugbar.
This is now the new design
Price: £199.99 | |
|
|
AQUATRONICA POWER & PLUG BAR
These units are UK rated and allow 6 pieces of equipment to be switched on and off. For larger setups multiple bars can be used connected together giving switching to a larger number of devices up to a maximum of 60 outlets more than enough for the average fish room.
Price: £149.99 |  |
|
|
Add pH monitor and control kit
This add on pack allows the addition monitoring and control of pH you may choose to use it in a number of ways. For monitoring the overal pH of the aquarium, setting warning alarms when dosing kalkwasser to prevent over dosing and dangerous rises in pH. In a calcium reactor to optimise internal pH and the control of CO2 via a solenoid, this makes adjusting a calcium reactor as easy as pie, If the calcium is a little low just increae the drip rate and the computer adds the optimal amount of CO2 to the reactor to keep the media in the reactor dissolved to maximum saturation.
For planted aquariums control the addition of CO2 accurately based on aquarium pH
You can connect multiple ph sensors to the unit so in an ideal world you can monitor in tank and in reactor. or even in multiple tanks if you have a number of aquariums.
Pack contains 1x pH probe and 1 x interface
Price: £107.98 | |
|
|
Add ORP monitor and control
Often the poor relation to pH monitoring as in the past it has been pretty expensive to implement. It has a number of really practical uses and the Aquatronica system makes it a good value option. Redox or ORP is often misunderstood by aquarists and it is certainly true that you can have a great aquarium without being a slave to orp readings. Its real use is in giving you a visual indicator of problems and the effective control of equipment. A couple of examples the ORP on most tanks runs across a range noticing a drop in this can often indicate a problem such as a turbo snail dying or some other pollutant that may have died behind a rock and not be immediately apparent. A quick look at the low orp reading or setting an alarm can instigate further investigation and prevent a small problem that might cause a domino effect if left unresolved.
Probably the most common use is the accurate measure and control of Ozonisers. It is very easy to do a lot of damage with unregulated use of ozone. Adding redox control allows you to control the dosing to set levels to achieve the desired affect on the aquarium.
The other great use is the monitor and control of slow flow denitrators. Anyone who has ever tried to use one of these manually, will tell you that keeping the redox low enough to keep denitrifying bacteria working but not going so low as to turn the whole reactor in to a sulphide farm is one of the black arts of the aquarium. With electronic control it's easy to monitor and control water flow and redox and get very efficient denitrification.
Kit includes 1 x ORP probe 1 x interface
Price: £117.98 | |
|
|
Add Automated top up and level control
Automated top up and level control
The connection of this can automate top up of both RO water or Kalkwasser from a stirrer or reservoir. The added stability of constant salinity rather than topping up the sump or tank every few day's makes life easier for the fish and the animals and saves work. With a little ingenuity and using the timer functions on the controller you could fully automate water changes.
Includes 1 x level sensor an additional interface is needed when more than one sensors is required.
Price: £20.99 | |
|
|
Add Density monitor and control
The use of this allows you to monitor and control salinity through the use of two resevoirs one of strong brine and the other of fresh water. It is possible to keep salinity to a very high level of accuracy.
If you plan to undertake using this method of salinity control we recommend fully testing your methodology before allowing unattended operation as the setting of the delay on monitor and control is very important as it takes time for each addition to mix in the aquarium. Highly accurate but needs a little planning IOHO
Histroically this sort of add on probe has been prohibitive but the Aquatronic system offers great value.
Kit includes 1 x density probe and 1 x interface.
Price: £177.98 | |
|
|
Temperature Sensor
Either as a replacement or additon to the sensor provided with the base unit.
Price: £19.99 | |
|
|
pH Interface and USB cable
Stand alone interface without probe allows the addition of extra probes to be added to the base unit.
Price: £59.99 | |
|
|
Redox Interface and USB cable
Stand alone interface allowing additional ORP probes to be added to the system.
Price: £51.99 | |
|
|
Conductivity Interface and USB cable
Allows the interface of additional Conductivity sensors for freshwter
Price: £51.99 | |
|
|
Temperature Level interface
Allows the connection of these controls to the base unit
Price: £51.99 | |
|
|
Density probe interface
Allows the connection of a density probe for salt water measurment and control.
Price: £51.99 | |
|
|
pH probe
Aquatronica pH probe
Price: £64.99 | |
|
|
Redox probe
Aquatronica redox/ ORP probe
Price: £69.99 | |
|
|
Conductivity probe
Aquatronica Conductivity sensor for use with fresh water
Price: £49.99 | |
|
|
PC Software for Aquatronica
Windows software for connecting and controlling the Aquatroica computer from your PC full readouts charting etc
Price: £59.99 | |
|
|
Aquatronica PC interface adaptor
Allows connection between the Aquatroica and a host windows PC
Price: £24.99 | |
|
|
Water Level Sensor
A water level sensor for connection to the Aquatronica Aquarium computer to control the level of aquariums pond sumps etc.
Price: £24.99 | |
|
|
Electrode holder
Fits to stress bars or the aquarium to hold sensor/probes in the aquarium
Price: £9.99 | |
|
|
Aquatronica pH4 calibration fluids
A 3 pack single use satchet of calibration fluid for pH probes system requires calibration at both 4 and 7 for accurate reading.
Price: £7.99 | |
|
|
Aquatronica pH7 calibration fluids
A 3 pack single use satchet of calibration fluid for pH probes system requires calibration at both 4 and 7 for accurate reading.
Price: £7.99 | |
|
|
Aquatronica pH10 calibration fluids
A 3 pack single use satchet of calibration fluid for pH probes system requires calibration at both 4 and 7 for accurate reading. If working with marine then greater accuracy can be obtained by using 7 and 10 fluids
Price: £7.99 | |
|
