 | Aquamedic 2001 pH controller
Measuring range: pH 0-14, Resolution 0,01 pH, Accuracy +/- 0,01 pH, Adjustment range: pH 3,5 - pH 10,5, Adjustment accuracy: +/- 0,05 pH, Dimensions: 150x84x40 mm, BNC connection, without electrode. suitable electrodes are shown below.
Price: £165.99 |
probe
|
|
 | Aqua Medic 2001 MV/Orp controller
These units are ideal for controlling Ozone or to control denitrification units where creating an anerobic environment is important to their operation.
Measuring range: -1000 up to +1000 mV, Accuracy +/- 1 mV, Adjustment range: -500 up to +500 mV , Adjustment accuracy: +/- 5 mV, Dimensions: 150x84x40 mm, BNC connection, without electrode. suitable electrodes:
Price: £165.99 |
probe
|
|
 | Aqua Medic 2001 Conductivity controller
The salt content of water can be determined by measuring the electrical conductivity. A special feature of the LF 2001 C conductivity monitor and controller is the broad measurment and control range, which is divided into 2 bands: from 0 to 2000 µS, the unit is used for monitoring desalinated water and fresh water, and in the range 0 to 200 mS, it is used for brackish and salt water. The unit can therefore be used for the control of reverse osmose units, for monitoring breeding tanks with soft water, and for the control of the salt content in marine aquaria. The unit is supplied with a directly connected, salt water resistent graphite electrode.
Price: £239.99 |
|
|
 | Aqua Medic pH control kit
This is kit is ideal for controlling pH in calcium reactors or the addition of CO2 in planted aquariums. It features everything you need including controller, probe, solenoid valve to control CO2 calibration fluids.
Price: £256.99 |
|
|
 | Aqua Medic pH Computer
Microprocessor controlled pH monitor and Controller. Water proof finger-touch keys are used to set the needed values and calibrate the eletrode. The controlling accuracy if fixed at 0.05 pH. The Computer can switched up to 500 watts using the supplied external electrical socket. The Computer is automatically calibrate. A plastic shaft pH electrode with BNC fitting and calibration fluids are included.
Price: £262.49 |
|
|
 | Aqua Medic MV Computer
Microprocessor controlled ORP monitor and Controller. Water proof finger-touch keys are used to set the needed values and calibrate the eletrode. The compter`s broad measuring and controlling range is minus 500 up to plus 1000 mV. The Computer is ideally suited to control the anaerobic biological filters such as denitrators. It also used to Control the supply of ozone to the aquarium. A plastic shaft Orp electrode with BNC fitting and calibration fluids are included.
Price: £283.99 |
|
|
 | Aqua Medic Light Computer
The Light Computer is supplied with three separate programmable channels. Channel one controls the primary lamp (e.g. metal halide, maximum 750 watt). Channel two controls the additional light ( e.g. blue fluorescent, maximum 300 watt). The third channel, the specialty of the computer, controls a night light with a max. of 100 watt The night-light`s intensity is controlled using an internal program to simulate the natural 29 day moon cycle.
Price: £294.99 |
|
|
 | Aqua medic Temperature Computer
Microprocessor controlled temperature monitor and controller. The mode of operation can be set using the function keys, either as a heater or cooler controller. In the "heating" mode, the actual temperature is adjusted to set value using a pulse-packet control with an accuracy of 0,1°C. In the "cooler" mode, the acuracy is 0,5°C. The max. usable wattage for heaters is 1000, for coolers 600 watts. Adigital temperature sensor is included.
Price: £187.99 |
|
|
 | Aquaniveau Auto top up single float
The aquaniveau electronic level controller may be used in 2 different modes:
- As a top up controller with one or two float switches, which is used to control the replacement of evaporated water. One switch controls the pumping from a storage vessel (not supplied), the other, if opted for, provides protection to prevent the top up pump (not supplied) from running dry. As refill pump, we recommend the peristaltic pump SP 3000.
- As maximum / minimum contact to control reverse osmosis units, in conjunction with a solenoid valve.
Price: £112.49 |
|
|
| | Aquaniveau Auto top up dual float
The aquaniveau electronic level controller may be used in 2 different modes:
- As a top up controller with one or two float switches, which is used to control the replacement of evaporated water. One switch controls the pumping from a storage vessel (not supplied), the other, if opted for, provides protection to prevent the top up pump (not supplied) from running dry. As refill pump, we recommend the peristaltic pump SP 3000.
- As maximum / minimum contact to control reverse osmosis units, in conjunction with a solenoid valve.
Price: £132.99 |
|
