The Aquamaster monitors water levels in the main Aquarium. The basic unit comes with a single float assembly. By adding additional Floats, a Sump can be monitored for high or low water levels. A unique "fill and Float" response time, enables precise water filling and Feed pump control. The unit is fitted with an audible alarm and additional outlet socket ie dosing pump etc. Each socket has a maximum loading of 200 watts. Complete with I.E.C. plugs and optional cabinet mounting bracket.

As we say in the intro does exactly what it says on the box

This may be added as a 2nd level controller or as a replacement for an existing.

AquaSurge 2 Pump WaveMaker

Programming is simple, via the large L.E.D display.Simply select the mode of operation and enter the pump(s) run and stop times.

Controls two pumps in four selectable modes of operation:

Programmed Timed Sequential
Random Timed Sequential
Programmed Timed Combined
Random Timed Combined
Each output socket has a maximum loading of 200 watts. Advanced micro-circuitry (zero voltage switching) avoids power surge on Start-up, thus decreasing wear on impellors. Timed Feed Mode from 1-60 Minutes. Complete with I.E.C. style plugs.CE Approved

AquaSurge Tidal Simulator 4 Pump WaveMaker

Our Flagship product developed over six years ago and now up-dated for the serious Reef Hobbyist.

Designed for Aquariums of 48" and over. This unit has the same specification, as our two pump model, but an enhanced processor enables a tidal sequence(s) to be replicated over a twelve hour period.

Four pumps can be enabled with a maximum of 800 watts.

We have used this model on our own invert and farm systems since they were first produced and recommend them highly.

The optional APP light sensor allows the unit to change flow patterns when the light reduces at night.

There have been a good few attempts at making a useful light system for night viewing the new Mooncast is a good design that can either be purchaed as a stand alone moonlight manually controlled or with the additional moon phase timer that controls the light over a 29 day lunar cycle.

Up to 4 lamp units can be connected together for longer tanks and greater effect. If you have not looked at your aquarium with one of these lights at night then you are only seeing half the picture.

Comming soon ETA month end

Fits inline between plug and MoonCast unit. Requires the power supply to have a standard timer fitted to replicate a lunar cycle. When the MoonCast activates for the first time the light emitted will be 100% and each subsequent activation, slowly dims the light until is has reached a set point. The light will then go back to 100% and the cycle repeats. Dimming and time span will depend on how long the MoonCast has been set by the timer to stay on or off.

Where a large aquarium is involved up to 4 of these units can be daisy chained together.

CALCIUM-MAX PART A
Calcium-Max is the cationic counterpart to Alkalinity-Max.
It consists of all the major and minor cations that constitute total hardness. Calcium is the major hardness ion. It alone makes up to 50,000 mg litre. The balance of the cations are: Magnesium, Strontium and Barium. These elements along with potassium, Lithium and Boron and other cationic trace elements are proportioned to imitate the same ratios, with respect to Calcium, as found in natural oceanic seawater. That means, when the Calcium is consumed down to the standard seawater level, the remains are nothing but seawater. Each litre combination of Calcium-Max and Alkalinity-Max can produce 125g (4.5oz) of calcareous growth.
Directions: Test Calcium and Alkalinity levels and dose before lights come on to avoid Ph swings. Shake well before use and add directly to the aquarium in a strong water fl ow area for dispersal.
Dose equal amounts of both A & B and wait about an hour before re-testing to allow for mixing. Target levels are between 400-450 ppm Calcium and 3-4 meq/L alkalinity. Do not dose more than 1
mL/gal in a 24 hour period. Suggested starter dosing: 50 Gallon (227 litre) aquarium. 3mL solution per 8 Gallons (36 litres) of aquarium water
15mL Calcium-Max part A
15mL Alkalinity-Max part B

ALKALINITY-MAX PART B
Alkalinity-Max is the anionic counterpart to Calcium-Max.
It consists of the elements that contribute to total alkalinity.
Carbonate, Bicarbonate and Hydroxide alkalinity are the major ions. They make up 2,500 milliequivalents of alkalinity per litre. Along with these anions are also, Sulphates, Bromides, Fluorides,
Iodides and other anionic traces, all in proper ratios with the respect to total alkalinity. When all the alkalinity is consumed down to the standard seawater level all that remains is seawater.
Directions: Test Calcium and Alkalinity levels and dose before lights come on to avoid Ph swings. Shake well before use and add to the aquarium in a strong water fl ow area for dispersal. Dose
equal amounts of both A & B and wait about an hour before re-testing to allow for mixing. Target levels are 400-450ppm Calcium and 3-4 meq/L alkalinity. Do not dose more than 1mL/gallon in a
24 hour period. Suggested Starter Dosing: 50 gallon (227 litre) aquarium 3mL solution per 8 gallons (36 Litres) of aquarium water
15mL Calcium-Max Part A
15mL Alkalinity-Max Part B

A larger set of this good value two part additive

Calcium Max 2 Gallon Set
Ideal for those looking for the economy of a largr size or those who have high usage aquariums.

IRON PLUS
Iron and other metal ions, play essential roles in metabolic processes of algae, vertebrates and invertebrates. The free cations are not stable for any length of time except in very minute
concentrations. Hence the oceans contain only traces of these substances. However, since the water mass is so great, even trace quantities are available in sufficient bulk to meet requirements. This
is not the case in captive systems. The bulk trace quantity of the metals is extremely small and can be depleted in hours through protein skimming and natural biological processes.
IRON PLUS consists of free metal ions and is Ph stabilised to maintain that condition.
Contents: 16 fl oz (470ml)

Traces in seawater appear in specific forms. The Reef Marine IODINE PLUS complex provides Iodine and the other forms of, at the ratios they occur in the oceans.
Iodine exists in the reduced and oxidised state. The interaction between these states, depending on Ph and Redox, maintains a minute concentration of free iodine. This form is most easily utilised, but is also, a strong oxidiser and can only be present in
very small quantities. The use of IODINE PLUS allows this to take place. The complex also, contains boron, molybdenum and vanadium and this mix mimics the form of these elements as they appear in the oceans.
Contents: 16 fl oz (470ml)

IONIC CALCIUM
Molluscs such as snails and clams remove calcium from the water as they build shells.
Along with the Calcium and Carbonate other substances will be removed to form the structure of Calcite Calcium. Liquid Calcite is a derivative of this form of calcium and does not affect Ph or adversely affect system salinity.
Each bottle contains sufficient calcium to produce almost ninety grams of shell weight.
Each 30ml will raise the free calcium level in 8 gallons (36ltrs) of water by 60 ppm.
Contents: 16 fl oz (470ml)

Calcium is the essential ingredient that allows stony corals to build hard rock structures. As the living coral polyps extract that element from the surrounding
Coral reef water, they also, incorporate trace substances, such as magnesium, strontium and barium along with the carbonates that enhance growth.
Liquid Aragonite is a derivative of aragonitic calcium and does not affect Ph or adversely affect system salinity.
Each bottle supplies enough free Calcium and essential trace elements to deposit nearly 90 grams of aragonite. Each 30 ml will raise the Calcium level in 8 gallons (36ltrs) of water by 60ppm.
Contents: 16 fl oz (470ml)

CONCENTRATED MAGNESIUM

Calcium and Magnesium are essential elements in the chemistry of seawater. In general the further the magnesium concentration drops from natural seawater levels the more difficult it becomes to maintain adequate levels of calcium and alkalinity.
Reef Marine Magnesium concentrate will safely elevate depleted levels fast. Each bottle contains more than 45,000 mg of magnesium ions, and 1.5 ml will raise one
gallon (4.5 lts) by 15ppm
May be used in conjunction with Calcium-Max part A & B to maintain an ionic residual.

Directions: Shake well before use and add directly to the aquarium in a strong water flow area for dispersal. Always test system water with a reliable test kit and add as required, especially if levels have fallen below the nominal 1350ppm seawater level.
Contents: 16 fl oz (470ml)

OMEGA 3 PLUS

A complex of natural lipids, fatty acids and oil soluble vitamins that are, essential for tissue metabolism in living organisms, both invertebrate and vertebrate. These fatty acids and vitamins are quickly depleted from well filtered closed systems and should be replaced on a regular basis.
Directions: one drop per 20 gallons (90 ltrs) on a daily basis in a strong water flow area for dispersal.
Contents: ½ fl oz (15ml)